Chisel Plow SVAROG PCh-2,5

Chisel Plow SVAROG PCh-2,5

Price request

Technical Parameters

Coupling method навесной
Performance per hour of operation, hectare/h) up to 2,5
Operating speed, km/h up to 10
Cut width, m 2-2,5
Weight, kg 1244
Tilling depth, cm up to 45
Overall dimensions (in operative position), mm
Length 2320
Width 2565
Height 1590
Width захвата рабочего органа, мм 310
Number of tools, pcs 5
Service life, years 8

Compatibility

150-220 hp:

MTZ 1523, 1523.3, 2022.23. К 3160 АТМ, К 3180 АТМ, К 5220 АТМ. KhTZ-150К-09, KhTZ-17221-09. VT-150D. John Deere 7730, 7830, New Holland TМ 140, Valtra Т 151- Т 191, Fend 415 Vario.

MTZ 1523, 1523.3, 2022.23. К 3160 АТМ, К 3180 АТМ, К 5220 АТМ. KhTZ-150К-09, KhTZ-17221-09. VT-150D. John Deere 7730, 7830, New Holland TМ 140, Valtra Т 151- Т 191, Fend 415 Vario.

Options

Mounting adapter should be purchased in order to attach the equipment to imported tractors.

Gear and active rollers can be installed. The active press wheels, in addition to leveling and crumbling the soil, serve to adjust the depth of processing.

The main advantage of blade tips and spare moulds is increased wear resistance due to:

  • using steel with the addition of boron (which increases the hardness and improves the cutting properties of steel);
  • spare moulds being longer and wider, compared to the majority of domestic analogues, allowing to loosen the soil more intensively;
  • blade tip point reinforced with additional rib, which increases the strength.

Attention!

Soil Requirements: soils free of stones, flagstone and other obstacles, having a specific resistance up to 0.12 MPa (1.2 kg/cm2), тhardness up to 4 MPa (40 kg/cm2) and humidity up to 22 %.

Advantages of SVAROG Chisel Plows

  • Тяжелый зубчатый каток

    A heavy crumbler roller rolls down the soil after loosening and breaks up large lumps, leveling the field surface.

  • подшипник выдерживает нагрузку 1800 кг

    A crumbler roller is flocked on two bearings. Each bearing has a load capacity of 1,800 kg..

  • долото и специальные крылья

    A combination of the chisel and special wings raising the layer of soil ensures the destruction of the plowing shoe. At that, the negative effects of wind and water erosion are minimized.

  • Сборная конструкция рабочих органов

    Modular tools. Replacement of a worn part of the tool instead of the whole tool..

  • Прочная и надежная конструкция

    Durable and reliable design. Increased cross-section of the frame tubes — 150×100×8.

  • Срезной болт

    A shear bolt protects the tools from any damage.

Chisel Plow SVAROG PCh-2,5: 3d модель

Video

Отзывы

Полетаев Ю.И., директор колхоза "Алей", Алтайский край:

Два чизельных плуга АЛМАЗ мы покупали — ПЧ‑2,5 и ПЧ‑4,5. На данный момент отработали они один сезон, причем работали хорошо, проблем нет.

© 2019 ALMAZ Group of Companies website development: AVALON

Contact us

By submitting this form, you agree to our Privacy policy.